Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 76

E v e r y 1 0 0 0 o p e r a t i n g h o u r s
5.26 Check the engine mounts
Fig. 112
Tighten fastenings of intake and exhaust man-
l
ifolds (Fig. 112) on the cylinder heads.
Check sockets and clamps between air filter,
l
exhaust turbocharger and charge air line as
well as the lubrication air line for tight fit and
leaks.
Retighten the fastening screws for oil sump
l
and engine mounts.
7 6
5.27 Change the oil in the drive
axle
i
Note
On other axle versions drain and filler plugs are of
slightly different design. Perform the oil change ac-
cordingly.
Caution
!
Drain oil only at operating temperature.
Environment
Catch old oil and dispose of environmentally.
Park the machine on level ground.
l
Fig. 113
Clean and unscrew all level inspection and
l
drain plugs (Fig. 113).
Drain and catch all oil.
l
Clean the drain plug and turn it back in with a
l
new seal ring.
B O M A G
BW 213 D-4