Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 22

I n d i c a t o r s a n d C o n t r o l s
3.1 General notes
Please read this section thoroughly before operat-
ing this machine if you are not yet conversant with
the indicators and control elements. All functions
are described in detail hereunder.
Paragraph 4 Operation contains only concise de-
scriptions of the individual operating steps.
2 2
3.2 Description of indicators
and control elements
Fig. 6
No. 1 = Ignition switch
Position "P"/"0" = ignition off, the key can be
Position "I"
i Note
The engine can only be started when the travel le-
ver is in braking position.
The ignition switch is provided with a lock against
repetitive starting. To repeat the starting proce-
dure you must first turn the ignition switch back to
"0"-position.
Position "II"
Caution
!
Run the engine warm for a short while before
starting to work. Do not let the engine run at
idling speed for longer than 10 minutes.
Do not shut the engine down all of a sudden
from full speed, but let it idle for a while for
temperature equalization.
B O M A G
pulled out, engine not running.
= ignition on, all control and
warning lights on the fault
monitoring board light up for a
moment. The lighting can be
switched on.
= turn further against spring
pressure, the engine starts, re-
turn the ignition key to position
"I" when the engine starts
BW 213 D-4