Customer Service Mode - Dräger Oxylog 3000 Instructions For Use Manual

Customer Service Mode

WARNING
Ventilation is not possible in customer service
mode.
In customer service mode, the ventilator performs
function tests, outputs status information and
permits configuration of parameter settings.
Displays in customer service mode appear in
English and cannot be changed to any other lan-
guage.
001 Set startup settings.
002 Select hose type.
003 Set date and time
(Greenwich Mean Time GMT).
004 Set measured values display window. Configure the layout of measured values in the measured
005 Enter activation code.
006 Test buttons and potentiometer.
007 Test loudspeaker, buzzer, LEDs and
display.
008 Display accu and supply data.
009 Display actual technical errors.
010 Display error and info logbook.
011 Display settings logbook.
012 Display language text.
Instructions for Use Oxylog 3000 SW 1.n
Configure start-up settings, restore manufacturer's
default settings.
Determine which ventilation hose system is used
(reusable or disposable hose system).
Set date and time.
values window or restore manufacturer's default settings.
Enter the activation code for options.
Check for correct functioning of keys and controls.
Check for correct functioning of loudspeaker, buzzer,
LEDs and display.
Display battery data and condition of the supply voltage.
Display any active technical errors.
Calibration logbook and technical errors in chronological
order.
Logbook of operating phases and ventilator settings.
Display screen texts in two selectable languages.
Configuration
79