Introduction - Kessel Pumpfix F Installation And Operating Instructions Manual

Person
Technical expert, (familiar with,
understands operating instructions)
Technical specialist, (technical worker,
in accordance with installation instruc-
tions and execution standards)
3

Introduction

3.1 Intended use
The backwater pumping station serves as a draining system for wastewater without sewage, domestic or industrial waste-
water.
The system is resistant to the usual domestic acids and alkalis. Condensate from condensing boilers must be neutralised or
diluted. Alternatively, a chemical-resistant customised solution can be purchased (individual@kessel.de). The system must
be installed in a building to guarantee frost protection.
Note on warranty
Only KESSEL accessories designed for the product may be used. If any modifications are made to the product or non-
original accessories are used, the warranty becomes null and void.
3.2 Scope of delivery
Pumpfix F version for installation in the floor slab
(1) Extension section (optional, max. 2)
(2)
(3)
(4)
(5) Inlet side connections
(6) Upper section, with inflow cover
(7) Power pack (E-pack)
(8) Motor-driven flap unit
(9) Outlet side connections
010-843
(inside), functional check
Pump
Seal
Drain body
Installation and operating instructions
Approved activities on KESSEL systems
Emptying, cleaning
Installation, replacement, mainte-
nance of components, connection
to power supply, commissioning
19 / 96