Front panel description
MM314 ports
The MM314's 24 10/100 Base-T Ethernet ports are located on the front panel and are labeled 1
through 24. The MM314's copper Gigabit Ethernet port is located on the left of the front panel
and is labeled 51. You can connect to these ports using a straight network cable with an RJ-45
connector, or a crossover cable with an RJ-45 connector.
MM314 alarm LED
The MM314's alarm (ALM) LED is located on the left of the front panel. The ALM LED indicates
that an alarm is present in the module.
Table 12: MM314 System LED
LED
ALM
130 Installation and Upgrades for the Avaya G350 Media Gateway
Name
Color
Alarm
Red
Meaning
OFF - The software turns this
●
LED off if BIST has passed and
48V PS is active
ON - Module is initializing, or an
●
alarm state exists on an interface,
or there is a mismatch between
Communication Manager
configuration and the Media
Module.
BLINK - There is a mismatch
●
between MV configuration and
this Media Module.