Step 4: Connect Power To The G350 - Avaya G350 Installing And Upgrading

Step 4: Connect power to the G350

After you have mounted the G350, installed the media modules, and attached grounding
conductors, you can connect power to the G350.
1. Connect the power cable to the power connector on the G350 back panel.
2. Plug the power cable into a mains socket. The G350 is now powered. The PWR LED on
the front panel lights. The CPU LED lights up if the firmware is running. At least one LED
on each media module, except the S8300, lights up initially and then goes off after about
20 seconds.
Step 4: Connect power to the G350
Issue 4 February 2007 43