Attaching Each Mounting Bracket To The G350; Before Mounting The G350 - Avaya G350 Installing And Upgrading

Installing the Avaya G350 Media Gateway
Figure 3: Attaching a mounting bracket with cable guides

Attaching each mounting bracket to the G350

The G350 is held in place by mounting screws through the two mounting ears. Fill racks from
the bottom; that is, mount units in the lower positions first, to avoid balancing problems and
cabling complications.
1. Position a bracket over the desired mounting position.
2. Affix the bracket to the chassis with three of the nine 6-32 x 3/8 screws provided.
3. Tighten with a screwdriver.

Before mounting the G350

Ensure that the rack is bolted to the floor and is earthquake-protected, if required. If the
●
rack is not securely fixed in place, do not proceed with the installation.
If the G350 is being mounted in a rack with other equipment already installed, the G350
●
must be positioned to avoid imbalance.
The G350 is shipped with 3 sets of four mounting screws. Choose the set of screws that
●
match the screw holes in the rack being used.
Note:
The G350 weighs 22.5 pounds (10 kg) empty and between 33 and 35 pounds
Note:
(between 15 and 16 kg) when equipped with media modules. Two people may be
needed to mount the G350 Media Gateway in the rack.
30 Installation and Upgrades for the Avaya G350 Media Gateway