Mounting The G350 In The Rack; Mounting The G350 On A Wall; Attaching Brackets To The G350 For Wall Mounting; Fastening The G350 To The Wall - Avaya G350 Installing And Upgrading

Mounting the G350 in the rack

1. Position the G350 in the rack. Ensure that there is adequate ventilation.
2. Verify that the screw holes are aligned with the rack hole positions.
3. Insert two mounting screws on each side.
4. Tighten the mounting screws. Avoid overtightening.
5. Verify that ventilation vents are not obstructed.
At this point, you have mounted the G350 chassis in the rack and are ready to insert media
modules as required in the planning documentation.

Mounting the G350 on a wall

To mount the G350 on a wall, use the two mounting brackets without cable guides.

Attaching brackets to the G350 for wall mounting

Attach a bracket to each side of the G350, as shown in the figure below.
Figure 4: Attaching a bracket to each side of the G350

Fastening the G350 to the wall

If the wall is flat, you can screw the G350 directly to the wall. If the wall is not flat, screw a
plywood board (415 x 465 mm, 20 mm thick) to the wall with wood screws, and fasten the G350
to the board.
Step 1: Mount the G350 chassis
Issue 4 February 2007 31