Step 4: Connect Power To The G350 - Avaya G350 Installation Manual

Step 4: Connect power to the G350

After you have mounted the G350, installed the media modules, and attached grounding conductors, you
can connect power to the G350.
To connect power to the G350:
1
Connect the power cable to the power connector on the G350 back panel.
2
Plug the power cable into a mains socket. The G350 is now powered. The PWR LED on the front
panel lights. The CPU LED lights up if the firmware is running. At least one LED on each media
module lights up initially and then goes off after about 20 seconds.
Installation of the G350 Media Gateway
December 2003
Installing the Avaya G350 Media Gateway
Step 4: Connect power to the G350
31