Step 4: Connecting Power To The G350 - Avaya G350 Installing And Upgrading

Step 4: Connecting power to the G350

After you have mounted the G350, installed the media modules, and attached grounding
conductors, you can connect power to the G350.
1. Connect the power cable to the power connector on the G350 back panel.
2. Plug the power cable into an AC outlet. The G350 is now powered.
The PWR LED on the front panel lights. The CPU LED lights up if the firmware is running.
At least one LED on each media module, except the S8300, lights up initially and then
goes off after about 20 seconds.
Step 4: Connecting power to the G350
Issue 7 November 2009 41