Step 4: Connect Power To The G250 - Avaya G250 Installing And Upgrading
Hide thumbs
Also See for G250:
- Administration manual (840 pages) ,
- Reference (812 pages) ,
- Administration (720 pages)
Table of Contents
Advertisement
Installing the Avaya G250 Media Gateway
Step 4: Connect power to the G250
After you have mounted the G250, installed the media modules, and attached the necessary
grounding conductor, you can connect power to the G250.
1. Connect the power cable to the power connector on the G250 back panel.
2. Plug the power cable into a mains socket. The G250 is now powered. The PWR LED on
the front panel lights. The CPU LED lights up if the firmware is running.
!
WARNING:
Never unplug the power cord from the G250 without unplugging all telephone
WARNING:
cables from line and trunk ports for Avaya G250 Media Gateways installed by
service personnel without the Supplementary Ground Connector.
38 Installing and Upgrading the Avaya G250 Media Gateway
Advertisement
Table of Contents
