Before Using The Pl - PROFACE PL-5700 Series Manual

Before Using the PL

Prior to use, be sure your PL is set up as follows.
• Before turning the PL ON, be sure to install its memory
(DIM module). If this module is not installed, the PL can be
turned on, but will not operate.
Install PL memory
Install HDD unit
Turn the PL ON
System Setup
OS Installation
• For system setup and OS installation, a PS/2 type keyboard is necessary.
• To use Windows
• For information on the PL-5700's bundled utility software, see the
README.TXT file on the Driver & Utility Disk.
8
Caution
Refer to 1-2 Options and the instruction manual that came
with the memory; 3-2 1. Installing the DIM Module (PL-
EM000/EM001/EM002); 3-2 2. Installing the External
Cache Memory Board (PL-EC000)
Refer to 1-2 Options and the instruction manual that came
with either the HDD unit; 3-2 3. Installing the HDD Unit
(PL-HD000), or the Flash File Disk Unit (PL-FF000/FF001);
3-2 4. Installing the FDD Unit (PL-FD000/FD001); 3-2 5.
Installing the Memory Card Interface Unit (PL-MC000)";
3-2 6. Installing the IDE Slave Adapter (PL-SA000); 3-2
7. Installing the Flash ROM Board (PL-FR000)
Refer to 4-2 Wiring the PL
Refer to Chapter 5 System Set-up
Refer to the OS's installation manual (e.g. Windows
package's manual)
®
3.1 or Windows
Disk's Display Driver. (For installation information, see the disk's
README.TXT file)
®
95, install the PL-5700 Driver & Utility
PL-5700 Series User's Manual
®
95