Table of Contents
Advertisement
Installation and Wiring
• The PL is intended to be mounted vertically, to allow natural ventilation. The PL can
also be tilted up to 30 degrees, if needed.
OK
Insert the PL into the front of the mounting panel
Secure the rear panel of PL in place with the mounting brakets (4)
Hook the mounting brackets into the two mounting holes on the top face, and the two
holes on the bottom face of the PL's body.
1.
(Top and bottom faces)
PL-5700 Series User's Manual
OK
OK
Must be 30
degrees
or less
• Avoid placing the PL next to other devices that
might cause overheating.
• The PL's operating temperatures are a maxi-
mum 40°C for the PL-5700T1-24VC, PL-
570*S1 and PL-570*L1, and 45°C for the PL-
570*T1.
• Keep the PL away from arc-generating devices such
as magnetic switches and non-fuse breakers.
Side panel
Mounting hole
Mounting panel
4-3
Advertisement
Table of Contents
