Main - PROFACE PL-5700 Series Manual

IDE Adapter 0 Master
IDE Adapter 0 Slave
These parameters are required only when the optional HDD unit is installed on
the PL. Set the type of hard disk for each master and slave unit connected to the
IDE connector.
Place the cursor on the "IDE Adapter 0 Master" parameter, and press the [Enter]
key to display the following screen.
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.

Main

IDE Adapter 0 Master
Autotype Fixed Disk:
Type:
Cylinders:
Heads:
Sectors/Track:
Write Precomp:
F1 Help
ESC Exit
Autotype Fixed Disk
Press the [Enter] key to set the hard disk parameters automatically.
Type
Select a set of hard disk settings, from 1 to 39, which matches your hard disk
specifications. If a correct set is not found, select the "User" option and set val-
ues for the "Cylinders," "Heads," "Sectors/Track," and "Write Precomp" param-
eters.
Set the "IDE Adapter 0 Slave" parameters in the same way.
5-4
Advanced Power Exit
(None)
[Press Enter]
[None]
↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓
Select Item -/+ Change Values
← →
← →
Select Menu Enter Select Sub-Menu F10 Previous Values
System Set-up
Item Specific Help
Attempts to
automatically detect
the drive type for
drives that comply with
ANSI specifications.
F9 Setup Defaults
PL-5700 Series User's Manual