Wiring The Pl; Connecting The Power Cord - PROFACE PL-5700 Series Manual

Installation and Wiring

4-2 Wiring the PL

1

Connecting the Power Cord

To prevent electric shocks, be sure to turn the PL OFF before connecting the power cord.
The PL-5700T1, PL-5701T1, PL-5700S1, PL-5701S1, PL-5700L1, and PL-5701L1 are
all designed to run on a 100V AC power supply. To avoid the dangers of fire, electric
hazards, and damage to equipment, use only the specified power supply voltage.
The power cord must be connected to the power terminals, on the rear of the PL.
Power switch
100V AC Unit
PL-5700T*/S*/L*
C21
Crimp-on Ring
*1 The three power terminals are:
AC100V L = AC Input Terminal—live line
AC100V N = AC Input Terminal—neutral line
FG
24V Unit
PL-5700T1-24VC
PL-5700 Series User's Manual
WARNING
N FG *1
L
Terminals
= Ground Terminal connected to the FP chassis
-
FG
+24V
Crimp-on Ring
Terminals
(not included with 24V unit)
L FG
N
Power Terminal Block
Screw size :
M3
-
+24V FG
Power Terminal Block
Screw size :
M3
4-5