Using The Contrast Adjustment Knob - PROFACE PL-5700 Series Manual

7

Using the Contrast Adjustment Knob

Four of the PL displays (5700L1, 5701L1, 5700S1 and 5701S1) have a contrast con-
trol knob so that you can adjust the display's contrast as desired. Digital requests,
however, that you use the SETUP utility, CONTSET.EXE, or WCONTSET.EXE for
contrast adjustment, instead of this contrast knob.
See "5-2, 1. Main
Normally, contrast adjustments are not required, since the contrast level is factory-set
at a normally optimal level.
Adjusting the Unit's Contrast
Bottom View
Side View
2-10
Backlight/Contrast," and "6-1 File List."
1. Loosen the dummy unit's six attachment
Remove the dummy
unit.
To increase the contrast, rotate the control
clockwise. To decrease it, rotate the control
counter-clockwise.
Specifications
screws, located on the bottom and side of
the PL.
PL-5700 Series User's Manual