Table of Contents
Advertisement
6
Installing the IDE Slave Adapter
Remove the PL-
HD000 cable
DC power cord
PL-SA000
CD-ROM
drive
3-14
To the
DC OUT
connector
(top)
To the
PL-HD000
(top)
Red line
<PL-HD000 Connector>
For DC OUT
connector
To DC INPUT
CD-ROM drive
To IDE
connection cable
INTERFACE
Optional Units and Expansion Boards
1. Remove the HDD cover. See step 1 in "3
Installing the HDD unit (PL-HD000), or
Flash File Disk Unit (PL-FF000/FF001)."
2. Unplug the PL-HD000 cable.
PL-HD000
3. Attach the PL-SA000 to the HDD con-
nector and PL-HD000 connector (see
steps 2 and 4 in "3. Installing the HDD
unit (PL-HD000), or Flash File Disk Unit
(PL-FF000/FF001)."
If you have difficulty inserting the connec-
To
the HDD
connector
tor, remove the PL-HD000, connect the
(bottom)
cable, and then re-install the PL-HD000.
Connect the DC power cord which came
with the PL-SA000 to the DC OUT con-
nector.
For PL-HD000
connector
4. To connect a commercially available CD-
ROM drive, first attach the PL-SA000's
CD-ROM drive connection cable to the
PL-SA000. Then, connect the CD-ROM
drive connection cable to the IDE INTER-
FACE on the CD-ROM drive. Last, con-
nect the DC power cord to both the DC IN-
PUT on the CD-ROM drive and the PL.
Make sure that pin 1 of the CD-ROM drive
connection cable matches pin 1 of the IDE
INTERFACE.
( PL-SA000 )
PL-5700 Series User's Manual
Advertisement
Table of Contents
