PROFACE PL-5700 Series Manual page 37

Optional Units and Expansion Boards
When the Heat Protector is NOT Needed
<PL-HD000 Connector>
Connect the
cable to here
PL-5700 Series User's Manual
Be sure the side
with the seal is
facing up.
PL-HD000
4) Insert the cable into the PL - HD000 unit's
Do not use
these pins
3) Attach the PL-HD000 and secure it in
place with the two screws given.
connector. Be careful that the pins are
aligned as shown in the drawing here. (The
four pins on the far right will be unused)
CAUTION: If the pins are in-
serted incorrectly, the unit may
be damaged
Place the cover back in
5)
place, and fasten its screws.
3-7