Installing The Memory Card Interface Unit (Pl-Mc000) - PROFACE PL-5700 Series Manual

Optional Units and Expansion Boards
5 Installing the Memory Card Interface Unit
PL-5700 Series User's Manual
1. Loosen the six attachment screws on the
side and bottom panels of the PL to re-
move the dummy unit. (See step 1 in
"4. Installing the FDD Unit (PL-FD000/
FD001)")
Remove the
dummy unit.
Memory Card Connector
The dummy unit is no longer needed
after the memory card interface unit
is installed.
2. Attach the PL-M000 cable to the PL's
memory card connector.
PL-MC000
3. To insert the PL-MC000, slide the unit
downwards, towards the front panel of
the PL. Then, tighten the unit's six at-
tachment screws on the side and bottom
panels of the PL.
Front Panel
If you plan to also install the PL-
FD001 (for development and mainte-
nance), first attach the PL-FD001, then
the PL-MC000.
( PL-MC000 )
3-13