Table of Contents
Advertisement
System Set-up
Video System
Set the type of the display.
You must select the "EGA/VGA" option for the PL to operate correctly.
Memory Cache
Press the Enter key to set the cache memory parameters.
Memory Shadow
Memory shadow copies information from the ROM BIOS to RAM to improve
the PL's performance.
This parameter is fixed as "Enabled," since information in the system BIOS must
be copied to RAM.
Selects whether or not information in the video BIOS is copied to RAM.
Selects the starting address to which the BIOS information is copied to. This
parameter is required when installing a board containing the extended BIOS in
the extended ROM area.
Boot sequence
Selects the drive from which you want to start the OS.
BackLight/Contrast
With the PL-5700L1 and PL-5701L1, adjust the brightness and contrast for the
display. With the PL-5700S1 and PL-5701S1, only the contrast can be adjusted.
Every time the [+] key, the selection scrolls forward (down). Each press of the
[-] key moves the selection in the opposite direction.
• The PL-5700T1 and PL-5701T1 do not have a brightness adjustment or a contrast
setting. The PL-5700S1 and PL-5701S1 also do not have a brightness setting.
The default setting is [Standard/4].
System Memory
Extended Memory
The main and extended memory amounts will appear.
PL-5700 Series User's Manual
System shadow
Video shadow
Shadow Memory Regions
Standard/
0
1
2
3
4
5
6
Standard/
7
S t a ndard brightnes s
B right/
0
Darker
1
2
3
4
5
6
B right/
7
B righter
High brightnes s
5-5
Advertisement
Table of Contents
