PROFACE PL-5700 Series Manual page 32

3-2
Commercially Available Products
Produc t
Slot 1 on all PLs can accommodate boards up to 210 mm
wide. For 3-slot type PLs (PL-5700*1), slots 2 and 3 can
accommodate boards up to 160 mm wide.
ISA (AT)
bus
c ompatible
board
direction
• Check that your expansion board's "foot" matches the width of the expansion
slot. Slot 1 is 20 mm wide, and slots 2 and 3 (3-slot PLs only) are 25 mm wide.
• Since the PL does not supply -5 and -12 V current, ISA(AT)-bus compatible
boards requiring -5 or -12 voltage are not available.
• Other commercially available boards may not be compatible with Digital's PL
unit. Installing incompatible boards may result in either damage to or failure of
the PL and will void your warranty.
<Main Memory>
Be sure to use only DIM modules manufactured by Digital. Installing other DIM
modules may result in either damage to or failure of the PL, and will void your
warranty.
Optional Units and Expansion Boards
Des cription
^
Width Mount facing this
Installation Area
P l u gs into PL's
expansion slot.
PL-5700 Series User's Manual