Table of Contents
Advertisement
The following PL-5700 software is for use with MS-DOS systems
• Must be version 3.21 or later.
• Digital does not guarantee this software will work with any OS other than those
previously mentioned.
• This software is made for use with MS-DOS. Do not use it in a Windows
ment.
• CONTSET.EXE cannot be used with the PL-5700T1, PL-5700T1-24VC or PL-
5701T1. Also, the brightness setting is ignored on the PL5700S1 and PL-5701S1.
• For an explanation of the EXTCOM.SYS, CONTSET.EXE, WCONTSET.EXE and
FUNCKEY.EXE applications, refer to their respective README.TXT file.
File name
PLATPH.EXE
P LC ALIB .E XE
K EYEM_P L.EX E
DIS P .EX E
FANALAR M .EX E
E XTCOM.SYS
C ONTS ET.E XE
6-2
Touch panel handler
C onverts input from the touch panel in line with dis play panel res olution (640 x
480). It is also compatible with Digital P anel Computers of the PL-386 family.
Touch panel data c alibration
B y touching the specified pos ition on the panel, the difference between the logic
value and measured value is corrected. Furthermore, us ing the PLATPH.E XE
application, it is pos s i b le to create files with data bas ed on calibration res ults
obtained here.
K eyboard emulator
Dis plays a picture of a keyboard on the s creen, enabling input from the touch
panel.
Dis play On/Off program
Turns the dis play, including the backlight, on/off.
Detects alarms in the C PU cooling fan.
C OM port driver (reception interrupt acknowledge). For details , s ee the
R EADME.TX T file on the same disk.
F or setti ng contras t with the PL-5700S1 and P L-5701S 1 when equipped with the
backlight brightness and contras t control utility for the P L-5700L1 and P L-
5701L1.
Bundled Software
Des cription
PL-5700 Series User's Manual
®
environ-
Advertisement
Table of Contents
