External Features - PROFACE PL-5700 Series Manual

Specifications
2-4 PL External Features
Inside the front maintenance cover
F
G
H
I
J
This figure shows the PL-5700 T1
The PL-5700T1-24VC, PL-5700T1, PL-5700S1, and PL-5700L1 each have three slots, designated as "slot 1," "slot
2," and "slot 3," starting from the one closest to the front panel. The PL-5701T1, PL-5701S1, and PL5701L1 provide
one slot, designated as "slot 1."
PL-5700 Series User's Manual
A B
C
E D
K
A. Display area
Display output area. The built-in VGA control-
ler supports PC compatible architecture.
B. Touch panel
This high-resolution analogue touch panel al-
lows you to configure a keyboard-less system.
C. Front maintenance cover
Remove this cover to connect the optional FDD
unit or memory card interface unit.
D. Keyboard connector
A PS/2 compatible keyboard can be connected
here.
E. Floppy disk/memory card insertion slot
This slot is used if the optional FDD unit or
memory card interface is installed.
F. Backlight replacement cover
Remove this hatch to replace the backlight. (With
black-and-white LCDs, the backlight is NOT
replaceable.)
G. RS-485 connector (COM3)
RS-485 interface, which allows communication
with other computers or connection to periph-
eral devices.
H. RS-232C connector (COM1)
I. RS-232C connector (COM2)
RS-232C interfaces (DB 9-pin male connectors),
which allow communication with other com-
puters or connection to peripheral devices.
J. Printer connector (LPT1)
Centronics standard interface (DB 25-pin female
connector), which connects a parallel device,
such as a printer.
K. Expansion slot
A variety of expansion boards, both Digital's and
other companies, can be installed here.
See "3-1 Available Options and
Expansion Boards"
2-11