Installing The Fdd Unit (Pl-Fd000/Fd001) - PROFACE PL-5700 Series Manual

4 Installing the FDD Unit
Built-in Type (PL-FD000)
Bottom panel of the PL
Side panel of the PL
3-10
Optional Units and Expansion Boards
( PL-FD000/FD001 )
1. Loosen the six screws on the bottom and
side panels of the PL, to remove the
dummy unit.
If the PL-FD000 is installed, the
dummy unit will no longer be neces-
sary.
Remove the dummy
unit.
FDD connector
2. Attach the PL-FD000 cable to the FDD
connector.
PL-FD000
PL-5700 Series User's Manual