PROFACE PL-5700 Series Manual page 39

Optional Units and Expansion Boards
When the Heat Protector is needed:
<PL-HD000 Connector>
Connect the
cable to here
PL-5700 Series User's Manual
7) Connect the cable into the PL-
Do not use
these pins
8) Place the cover back in place,
HD000's connector. Refer to the
left-hand detail drawing to be
sure the cable is connected
correctly. (The four pins on the
far right will be unused)
CAUTION: If the pins are in-
serted incorrectly, the unit may be
damaged
and fasten its attachment screws
in place.
3-9