Installing An Expansion Board - PROFACE PL-5700 Series Manual

8

Installing an Expansion Board

Expansion
board
Expansion
board
Re-attach the
filler strip
removed in step 1
3-16
Optional Units and Expansion Boards
1. Loosen the two screws of the unused ex-
pansion slot to remove the filler strip.
Remove filler strip
2. Insert the expansion board into the ex-
pansion slot.
Insert here
3. Secure the board in place with the two
mounting screws.
If your expansion board does not have a
front panel, fasten it in place with the PL's
internal screw holes, and externally, attach
screw (1) which came with the expansion
board. Then, replace the filler strip and
tighten the strip's two screws.
PL-5700 Series User's Manual