Relay Connection - Danfoss VLT AutomationDrive FC 300 Design Manual

FC 300 Design Guide

Relay Connection

To set relay output, see par. group 5-4* Relays.
Terminals for relay connection
(Frame sizes A1, A2 and A3).
100
How to Install
No.
Terminals for relay connection
(Frame sizes A5, B1, B2, C1 and C2).
MG.33.B8.02 - VLT ® is a registered Danfoss trademark
01 - 02 make (normally open)
01 - 03 break (normally closed)
04 - 05 make (normally open)
04 - 06 break (normally closed)