Valve Accessories; Technical Data - Samson 3241-1-Gas Mounting And Operating Instructions

Noise emissions
Trims with flow dividers can be used to re‑
duce noise emission (see u T 8081).

3.3 Valve accessories

Information Sheet u T 8350

3.4 Technical data

The nameplates provide information on the
control valve version. See the 'Markings on
the device' section.
Note
More information is available in Data Sheet
u T 8020-2.
DIN DVGW test mark
The valves were typetested by TÜV (German
technical surveillance association) and re‑
ceived the test mark by DVGW (German
Technical and Scientific Association for Gas
and Water) as specified in Table 3‑2.
Conformity
The Type 3241G Valve bears the CE mark of
conformity:
EB 8020 EN
Design and principle of operation
Temperature range
Depending on the version, the control valve
is designed for a temperature range from
–20 to +220 °C.
Leakage class
Leakage class according to DIN EN 161
Noise emissions
SAMSON is unable to make general state‑
ments about noise emissions. The noise emis‑
sions depend on the valve version, plant fa‑
cilities and process medium.
3-5