The valve nameplate (80) is affixed to the
flange (see Fig. 2‑4).
2.3 Actuator nameplate
See associated actuator documentation.
The actuator nameplate (A100) is stuck on
the diaphragm casing (see Fig. 2‑4).
2.4 DVGW register number
Typ 3241-G
DVGW-PIN
Klasse D, p zul.
Zul. Außentemp. –29...+60°C
Fig. 2-3: DVGW register number
The plate with the DVGW register number
(212) is affixed to the bellows seal (see
Fig. 2‑4).
2.5 Material numbers
The seat and plug of the valves have an item
number written on them. Specifying this item
number, you can contact us to find out which
material is used. Additionally, a seat code is
used to identify the trim material. This seat
code is specified on the valve nameplate.
EB 8020 EN
0085
Fig. 2-4: Markings on the control valve
Markings on the device
210
A100
80
212
2-3