Safety instructions and measures
NOTICE
!
Risk of valve damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the valve material. Unsuitable lubricants may cor‑
rode and damage the surface.
Î Only use lubricants approved by SAMSON (u AB 0100).
Risk of contamination of the process medium through the use of unsuitable lubricants
and/or contaminated tools and components.
Î Keep the valve and the tools used free from solvents and grease.
Î Make sure that only suitable lubricants are used.
1.4 Warnings on the device
Warning
Meaning of the warning
Warning against moving parts
There is a risk of injury to hands or fingers through the
stroking movement of the actuator and plug stem if they
are inserted into the yoke while the air supply is con‑
nected to the actuator.
1-8
Location on the device
EB 8020 EN