Lifting The Valve - Samson 3241-1-Gas Mounting And Operating Instructions

− Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
− Protect the piping and any mounted
valve accessories against damage.
− Protect the control valve against moisture
and dirt.
− The permissible transportation tempera‑
ture of standard control valves is –20 to
+65 °C.
Note
Contact our after-sales service for the trans-
portation temperatures of other valve ver-
sions.
Fig. 4-1: Lifting points on the control valve
EB 8020 EN
Shipment and on-site transport
4.3.2

Lifting the valve

To install a large valve into the pipeline, use
lifting equipment (e.g. crane or forklift) to lift
it.
Lifting instructions
− Use a hook with safety latch (see
Fig. 4‑1) to secure the slings from slip‑
ping off the hook during lifting and
transporting.
− Secure slings against slipping.
− Make sure the slings can be removed
from the valve once it has been installed
into the pipeline.
− Prevent the control valve from tilting or
tipping over.
4-3