Install The Pressure And Tank Hoses - Raven AutoBoom Installation Manual

Chapter 3
AutoBoom Valve Mounted to the Machine
FIGURE 2.
Note:
Mount the AutoBoom valve so that the LC and RC ports are facing up.
Secure the mounting plate to the machine on the left side of the support beam (near the corner of the tank
2.
and behind the machine's hydraulic valve) using two 2" W x 5" L x 3/8" thread U-bolts (P/N 321-0000-328)
and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).

Install the Pressure and Tank Hoses

8
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine's system may be
extremely hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valve.
Goldacres Row Crop AutoBoom Installation Manual