Standard Node Mounting Kit; Install The Smartrax Equipment - Raven SmarTrax Installation Manual

Chapter 3

Standard Node Mounting Kit

Standard Steering Control Node Mounting Kit (P/N 117-0197-051)
TABLE 2.
Picture

Install the SmarTrax Equipment

Important: The Challenger Armrest ECU must be updated to version 2.19 or greater in
order to work with the SmarTrax system. Contact your local AGCO or CAT
dealer to obtain the software update.
Node Installed on Mounting Plate
FIGURE 1.
Mount the SmarTrax node (P/N 063-0173-031) to the mounting plate (P/N 107-0171-888) using three 3/8"-
1.
16 x 1-1/4" hex bolts (P/N 311-0054-106) and three 3/8"-16 UNC nylon lock nuts (P/N 312-4000-061).
8 Challenger MT 7XXC and MT 8XXC Series SmarTrax Installation Manual
Item Description
Bracket - Challenger Mounting
Bolt - 3/8"-16 x 1-1/4" Hex
Nut - 3/8"-16 UNC Nyloc Lock
Part Number Qty.
107-0171-888
311-0054-106
312-4000-061
1
3
3