CHAPTER
6
Install the UltraGlide Wiring
Wiring Connections
Note:
For wiring connections made outside the cab, apply dielectric silicone grease (P/N 222-0000-006)
generously on both the male and female ends of the connectors. Application of the grease will
prevent corrosion to the pins and wires.
Install the AutoBoom Node
UltraGlide AutoBoom Node Installed
FIGURE 1.
Manual No. 016-0230-009 Rev B
W iring
C h a p t e r 6
CAUTION
Always connect the power cable as the last
step in the wiring process and verify that the
power leads are connected with the correct
polarity. Reversing power leads can cause
severe damage to the equipment.
Row Crop
21