Install The Left And Right Cylinder Up Hoses - Dual Tilt Cylinder Option - Raven AutoBoom Installation Manual

Install new hydraulic hoses on the 90° ends of the installed tee fittings.
4.
Route and connect the left installed hydraulic hose to Port LC on the AutoBoom valve.
5.
Route and connect the right installed hydraulic hose to Port RC on the AutoBoom valve.
6.
Install the Left and Right Cylinder Up Hoses - Dual Tilt Cylinder
Option
Left and Right Cylinder Up Hoses on the Machine's Hydraulic Valve
FIGURE 7.
Left and Right Cylinder Up Hoses on the AutoBoom Valve
FIGURE 8.
Install a new hydraulic hose on the machine's left cylinder up port.
1.
Connect the other end of the installed hose to Port LV on the AutoBoom valve.
2.
Install a new hydraulic hose on the machine's right cylinder up port.
3.
Connect the other end of the installed hose to Port RV on the AutoBoom valve.
4.
Install tee fittings in Ports LC and RC on the AutoBoom valve.
5.
Install two new hydraulic hoses on Port RC of the AutoBoom valve.
6.
Route and connect the installed hydraulic hoses to the machine's right rod-end cylinder port.
7.
Install two new hydraulic hoses on Port LC of the AutoBoom valve.
8.
Route and connect the installed hydraulic hoses to the machine's left rod-end cylinder port.
9.
Manual No. 016-0230-009 Rev B
Hydraulic System
11