Install The Load Sense Hose - Raven AutoBoom Installation Manual

Install the Load Sense Hose

Load Sense Hose Installed on the Machine's Hydraulic Valve
FIGURE 11.
Remove the machine's load sense hose from the machine's hydraulic valve.
1.
Install a tee fitting in the load sense port on the machine's hydraulic valve.
2.
Connect the machine's load sense hose on the opposite end of the installed tee fitting.
3.
Install a hydraulic hose on the 90° end of the installed tee fitting.
4.
Connect the other end of the installed hydraulic hose to Port LS1 on the AutoBoom valve.
5.
Manual No. 016-0230-009 Rev B
Hydraulic System
13