CHAPTER
3
Install the UltraGlide Hydraulic System
Install Fittings on the AutoBoom Valve
Before mounting the Autoboom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure.
Mount the AutoBoom Valve
AutoBoom Valve Mounted on the Valve Mounting Plate
FIGURE 1.
Secure the AutoBoom valve (P/N 063-0131-125) to the mounting plate (P/N 107-0171-619) using four
1.
5/16"-18 x 7/8" grade 8 hex bolts (P/N 311-0052-104) and four 5/16" zinc plated lock washers (P/N 313-
1000-019).
Manual No. 016-0230-009 Rev B
H ydraulic System
C h a p t e r 3
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
7