Accuboom Installation; Install The Accuboom Node - Raven AccuBoom Installation Manual

Miller condor g-series

Hide thumbs Also See for AccuBoom:

Table of Contents

CHAPTER

The instructions in this manual are designed to assist in the proper installation of the AccuBoom system on

Miller Condor G-Series sprayers. Refer to your computer's Installation & Operation Manual for instructions on

setting up the software and using the AccuBoom system.

Locate the node enclosure along the right rear chassis frame, beneath the product tank and open cover.

Locate the mounting holes to the right of the boom sense/speed node.

Mount the AccuBoom node (P/N 063-0172-316) to the node enclosure using three 1/4"-20 x 1" hex bolts

(P/N 311-0050-105), six 1/4" flat washers (P/N 313-2300-009), and three 1/4"-20 nylon lock nuts (P/N 312-

4000-057).

AccuBoom Node Installed

FIGURE 1.

Boom Sense/Speed

Node

Manual No. 016-1001-076

A ccuBoom

C h a p t e r 3

Installation

Table of Contents