Install The Pressure And Tank Hoses - Raven RS1/HDU Installation Manual

FIGURE 10. Right Steering Hose Installed on Steering Valve
7. Connect the 90° end of the installed hydraulic hose to the fitting installed in Port B of the steering valve.

INSTALL THE PRESSURE AND TANK HOSES

FIGURE 11. Pressure Hose Installed on Steering Orbital
Installed Pressure
Hose (P/N 214-
1000-638)
1. Remove the cap from the tee fitting installed in the pressure port (lower-left corner) of the steering orbital.
2. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-638) in the open port of the tee fitting.
Hydraulic System Installation: Install the Pressure and Tank Hoses
HYDRAULIC SYSTEM INSTALLATION
Machine's
Pressure Hose
17