Install The Ultraglide Sensors; Boom Sensor Mounting Locations; Mount The Boom Sensors; Mount The Center Rack Sensor - Raven AutoBoom Installation Manual

For redball 690

Hide thumbs Also See for AutoBoom:

Table of Contents

Install the UltraGlide Sensors

Sensor mounting locations may be influenced by the boom configuration. Determine the appropriate location

for mounting the sensors on the boom, ensuring the sensors will not interfere with or be damaged while folding

or unfolding the booms. The sensors should be mounted outside of the boom fold, but inside of the boom

breakaway.

Mounted Boom Sensor

FIGURE 7.

Secure the left sensor (P/N 063-0130-014) to the front of the left boom using two 1-9/16" W x 2-1/2" L x 3/8"

thread U-bolts (P/N 107-0171-611) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).

Tighten the nuts to ensure the sensor is mounted securely.

Repeat the steps above to mount the remaining boom sensor(s).

Center Rack Sensor Mounting Location

FIGURE 8.

Manual No. 016-0230-066

UltraGlide

Table of Contents