Install The Powerglide Plus Wiring; Install The Autoboom Node; Connect The Harness To The Boom Function Controls - Raven AutoBoom Installation Manual

For redball 690
Hide thumbs Also See for AutoBoom:
Table of Contents

Advertisement

Chapter 4

Install the PowerGlide Plus Wiring

Wiring Connections
Note:
For wiring connections made outside the cab, apply dielectric silicone grease (P/N 222-0000-006)
generously on both the male and female ends of the connectors. Application of the grease will
prevent corrosion to the pins and wires.

Install the AutoBoom Node

Mount the AutoBoom node (P/N 063-0130-010) to the valve mounting plate (P/N 107-0171-802) next to the
1.
AutoBoom valve using three 3/8"-16 UNC x 1-1/4" zinc plated hex bolts (P/N 311-0054-106) and three 3/8"-
16 zinc flanged lock nuts (P/N 312-1001-164).
Note:
Position the node so that the cable connectors face down.
Insert the large, rectangular node connector on the harness cable (P/N 115-0230-045) into the left port of
2.
the AutoBoom valve.
Tighten the bolt on the node connector to secure the connection.
3.

Connect the Harness to the Boom Function Controls

Locate the Left Press and Right Press connectors on the harness cable (P/N 115-0230-045).
1.
Route the connectors to the AutoBoom valve (P/N 063-0131-126).
2.
Connect the Left Press connector to Port G1 on the AutoBoom valve.
3.
Connect the Right Press connector to Port G4 on the AutoBoom valve.
4.
Locate the Left Solenoid and Right Solenoid connectors on the harness cable.
5.
Connect the Left Solenoid connector to Port 4A on the AutoBoom valve.
6.
Connect the Right Solenoid connector to Port 4B on the AutoBoom valve.
7.
Locate the Left Prop and Right Prop connectors on the harness cable.
8.
Connect the Left Prop connector to Port 5A on the AutoBoom valve.
9.
Connect the Right Prop connector to Port 13A on the AutoBoom valve.
10.
32
CAUTION
Always connect the power cable as the last
step in the wiring process and verify that the
power leads are connected with the correct
polarity. Reversing power leads can cause
severe damage to the equipment.
Redball 690 AutoBoom Installation Manual

Advertisement

Table of Contents
loading

Table of Contents