Table of Contents
Advertisement
2 MOUNTING THE WIRING HARNESS
The total SBGuidance cable harness exist of several
cables, from the battery to the terminal. Raven Europe
offers two power harness options; the CAN Basic
harness or the Implement Ready (IR) harness. As an in-
cab terminal harness Raven Europe offers a harness to
connect the Viper 4(+) or the older GeoStar terminal.
With an adapter harness it is also possible to connect a
Viper 4(+) to the GeoStar terminal harness.
2.1
CAN BASIC POWER HARNESS
The basic harness can only be used for tractor steering.
If the tractor is fitted with this harness, it is not
possible to use the tractor for implement steering
(TWIN, plough).
2.2
CAN IMPLEMENT READY (IR) POWER
HARNESS
With an Implement Ready harness the tractor can be
used both for tractor and implement steering. The
IBBC connector can be used to connect an implement
(Figure 2). The Implement Ready power harness runs
from the battery to the IBBC connector at the rear of
the tractor. It branches off to connect the STU chassis
harness and contains fuses near the split.
PAGINA 13/48 | Installation manual | 016-8000-098EN | Rev. A
MOUNTING THE WIRING HARNESS | SBGUIDANCE | SMARTRAX MD
FIGURE 2 IBBC BRACKET WITH CONNECTOR.
Advertisement
Table of Contents
