Reely ROAD EB-04L Operating Instructions Manual page 46

Setting Rear Axle Camber:
For setting the camber, turn the upper transverse link
(A).
Because the upper transverse link has a left and right
A
hand thread at either end, the transverse link does
not need to be dismantled for the camber to be
adjusted.
In the axle spur there are several more suspension
points (B) for the upper transverse link. When the
B
wheel rebounds, the camber changes depending on
the installation position (e.g. stronger camber when
the wheel is pushed in).
Figure 3
46