Reely ROAD EB-04L Operating Instructions Manual page 50

• Put the throttle/brake lever back into neutral position
• Now wait for at least 3 seconds so that the programming can be saved. The speed controller is then ready for use,
programming of the full throttle setting for forwards / reverse driving and neutral position are stored.
• Switch off the speed controller; the programming to the transmitter is complete.
If you are always using the same transmitter, you only need to programme the throttle/brake lever of your
transmitter once.
Reprogramming of the full throttle and neutral positions may, however, be required if you adjust the trimming
for the drive function.
50