Cardinal 205 Installation And Technical Manual page 25

 AND UNITS KEY
This combination will enter the Test mode. The Test mode is used to test of all the
display elements. It consists of five (5) cycles, each lasting about one (1) second:
1. All horizontal segments will turn on (no annunciators).
2. All vertical segments and decimal points will turn on (no annunciators).
3. All annunciators will turn on.
4. All display elements off.
5. The model number (205) and the software version X.X.
6. The calibration numbers (C1 to C4).
 AND PRINT KEY
This combination is used to change the selected print ticket format. Pressing the 
key then the PRINT key will display a prompt "Prt=". Press the ENTER key to show
the current value. If the setting displayed is acceptable, press the ENTER key again
to save it. Otherwise, using the numeric keys enter the new setting, then press the
ENTER key to save it. Allowable values are:
0 = print tab settings
In addition to using the  key, PRINT key combination to change the print ticket
format, the operator (just prior to printing the ticket) can change the print ticket format
at the end of the weighing operation. This is accomplished by performing the normal
weighing operation, then pressing the desired format number (0, 1 or 2), followed by
pressing the PRINT key.
NOTE: When a print format is selected (by either method), it will remain active
until changed by the operator.
PRINT KEY
Pressing this key will initiate the transmission of weight and other data via the selected printer
output port (see Port= under Print menu). The first gross or net weight printed after the
gross weight has returned to "zero" will be added to the associated accumulator, and the
consecutive number will be incremented.
Note that the indicator will not respond to the Print command unless the weight display is
stable. If displaying gross weight, the only weight printed is gross weight. If displaying net
weight, the gross, tare, and net weights are printed.
The 205 includes support for visual tickets. Visual
tickets are designed by the PC based programs
Visual Print or nControl, then downloaded to the
indicator. Two programmable formats in addition to
the standard print tab settings are allowed.
Print formats are selected by using the  and PRINT
keys in combination (refer to the  key,  and
PRINT key section for details).
NOTE: When the PRINT key is pressed, the
indicator looks for the selected format. If a visual
ticket is not found it reverts to the print tab settings.
8200-M129-O1 Rev D  205 Installation & Technical
KEYPAD FUNCTIONS, CONT.
1 = visual ticket format 1 2 = visual ticket format 2
#2
100.00 lb G
20.00 lb T
80.00 lb N
0.00 lb GROSS ACCUM
272.00 lb NET ACCUM
TICKET EXAMPLE
19