gefran AFE200 Series Instruction Manual page 95

Menu PAR Description
9.39 1614 Analog inp 1X bottom
9.50 1664 Analog inp 2X bottom
Setting of an offset value to algebrically add to the relative analog input of the expan-
sion card.
Menu PAR Description
9.40 1616 Analog inp 1X offset
9.51 1666 Analog inp 2X offset
Setting of an offset value to algebrically add to the relative analog input of the expan-
sion card.
Menu PAR Description
9.41 1618 Analog inp 1X gain
9.52 1668 Analog inp 2X gain
This parameter contains the value of the multiplier factor to apply to the analog refer-
ence of the expansion card calculated using the Analog inp gain tune function.
Example :
An external analog reference only reaches a maximum of 9.8V instead of 10V. 1.020
(10V : 9.8V) is entered as the Analog inp x gain parameter.
The same result can be achieved using the Analog inp x gain tune function. This pa-
rameter can be selected from the keypad menu. The maximum analog value available
(in this case 9.8V) must be present on the terminal, with positive polarity. Press the
Enter key on the keypad to start analog reference self-tuning.
Menu PAR Description
9.42 1626 Sorg segno ing an 1X
9.53 1676 Sorg segno ing an 2X
L�DIGSEL2
Selection of the origin (source) for the signal to be assigned to the relative digital input
for selecting the sign of the relative analog reference signal. The functions that can be
associated with the digital outputs are listed in the "L_DIGSEL2" selection list.
UM Type
cnt INT16
cnt INT16
UM Type
cnt INT16
cnt INT16
100%
{
Analog inp x offset
0
UM Type
FLOAT
FLOAT
UM Type
LINK
LINK
AFE200 • Instruction Manual
FB BIT Def
-16384
-16384
FB BIT Def
0
0
FB BIT Def
1.0
1.0
FB BIT Def
16 6000
16 6000
Min Max Acc
-32768 +32767 ERW
-32768 +32767 ERW
Min Max Acc
-32768 +32767 ERW
-32768 ERW
+32767
10V
Min Max Acc
-10.0 10.0 ERW
-10.0 10.0 ERW
Min Max Acc
0 16384 ERW
0 16384 ERW
95