gefran AFE200 Series Instruction Manual page 118

If set to 2 the datum is assigned a 32-bit count.
If set to 3 16 bits on the channel are reserved for the datum, not used.
If set to 4 32 bits on the channel are reserved for the datum, not used.
If set to 5 the datum is assigned a 16-bit count used by MDPLC.
If set to 6 the datum is assigned a 32-bit count used by MDPLC.
If set to 7 the datum is assigned engineering units on a 16-bit integer.
If set to 8 the datum is assigned engineering units on a 32-bit integer.
If set to 9, the datum is assigned a 16-bit integer engineering unit format not in real
time (5-10ms)
If set to 10 the datum is assigned a 32-bit integer engineering unit format or float for-
mat if the associated parameter is a float-type parameter not in real time (5-10ms)
Note!
If the sys parameter is not assigned, none of the subsequent channels are transferred to the fieldbus,
even if programmed.
Menu PAR Description
14.4.3 4184 Dig Fieldbus S->M1
14.4.7 4194 Dig Fieldbus S->M2
14.4.11 4204 Dig Fieldbus S->M3
14.4.15 4214 Dig Fieldbus S->M4
14.4.19 4224 Dig Fieldbus S->M5
14.4.23 4234 Dig Fieldbus S->M6
14.4.27 4244 Dig Fieldbus S->M7
14.4.31 4254 Dig Fieldbus S->M8
14.4.35 4264 Dig Fieldbus S->M9
14.4.39 4274 Dig Fieldbus S->M10
14.4.43 4284 Dig Fieldbus S->M11
14.4.47 4294 Dig Fieldbus S->M12
14.4.51 4304 Dig Fieldbus S->M13
14.4.55 4314 Dig Fieldbus S->M14
14.4.59 4324 Dig Fieldbus S->M15
14.4.63 4334 Dig Fieldbus S->M16
If associated with the relative src, the value of this parameter is sent to the bus.
The user may modify the M->S and by S->M sys parameters. The consistency of the
sys with the parameter assigned to the channel is checked.
Check for channels S->M:
Sys parameter
Count 32
Count 16
Menu PAR Description
14.4.4 4186 Fieldbus S->M1 mul
118
UM Type
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
INT32
FB type result
32 bit Sends all 32 bits of input to fieldbus. OK
16_H Sends all 32 bits of input to fieldbus. OK
16_L Sends all 32 bits of input to fieldbus. OK
32 bit Doesn't know whether to send 16H or 16L. Error
16_H Sends all 16H bits of input to fieldbus. OK
16_L Sends all 16L bits of input to fieldbus. OK
UM Type
FLOAT
AFE200 • Instruction Manual
FB BIT Def
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
32 0
FB BIT Def
1.0
Min Max Acc
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
0 0 ERW
Min Max Acc
1.0 1000.0 ERW