Startup Wizard - gefran AFE200 Series Instruction Manual

7.1 Startup Wizard

Introduction
The startup wizard is a guided procedure used for quick start-up of the drive that
helps to set the main parameters.
It consists of a series of questions relating to the various sequences for entering
and calculating the parameters necessary for correct drive operation.
The order of these sequences is as follows:
●
●
●
●
●
●
The format of the function selection page is as follows:
T+
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
Pressing the E key, the function to be programmed is accessed.
Press the ▼ (Down) key to move to the next function skipping the current func-
tion.
Press the ▲ key to return to the previous function.
To terminate the sequence of functions and return to the menu, press the ESC
key.
The end of the start-up sequence is indicated with the page:
T+
STARTUP WIZARD
End of se q uence !
U p =Back
Press the ▼(Down) key to exit the sequence and return to the menu.
60
Basic connections
Setting of the capacitor value
Setting of the choke value
Setting of the DC-link parameters
Setting of application parameters (only if an application is installed)
Saving parameters
T - EN LOC ILim n:0 AL
T- EN LOC ILim n:0 AL
Down=Next
AFE200 • Instruction Manual
T+ T- EN LOC ILim n:0 AL
STARTUP WIZARD
Set capacitor value ?
E=Yes Down=Next
See step 1
See step 2
See step 3
See step 4
See step 5