Otto Bock 4R108-3L Instructions For Use Manual page 13

CAUTION
Exceeding the service life
Risk of injury due to change in or loss of functionality and damage to the
product
„ Ensure that the approved service life is not exceeded.
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
„ Observe the alignment and assembly instructions.
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
„ Use caution when working with the product.
„ If the product is damaged, check it for proper function and readiness
for use.
„ In case of changes in or loss of functionality, do not continue using the
product (see „Signs of changes in or loss of functionality during use"
in this section).
„ Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthetic components relative
to each other and by the development of noises.
3 Alignment and connection
3.1 Lamination socket (use of 4R108=3L or 4R109=3L)
The 2Y38=3L Lamination Shell is integrated in the laminate as a lamina-
tion anchor.
Fabricate the socket liner with Pedilin®, providing a distal area build-up of
Ottobock | 13