sauter KERN SW 1000 Instruction Manual page 27

4.3.10 Adjustable measurements
Filter:
Use the arrow keys <◄> , <►> to set the filter for adjustable measurements:
A, B, C and Z (linear).
Detector:
Use the arrow keys <◄> , <►> to set the detector for adjustable measurements:
Fast, Slow and Imp.
mode:
Use the arrow keys <◄> , <►> to set the integral mode for adjustable
measurements: SPL, SD, SEL, E, Max, Min, Peak, LEQ, LN1 to LN10.
4.3.11 Timer
repeat every hour to achieve an automatic measurement over 24 hours.
Timer:
Use the arrow keys <▲> , <▼> to set the working mode of the timer: OFF, one
time and loop.
Start Day (start day):
Use the arrow keys <▲> , <▼> to set the trigger date for timers : Ignoreand one
fixed day every 30 days. If you select Ignore, the timer ignores the date and uses
only the start time to trigger.
Start Time (start time):
Use the arrow keys <▲> , <▼> to set the time for the timer: 00:00~23:59
Repeat Period (repetition time):
If the timer is triggered, it will be retriggered each time the repeat time has
elapsed. Press <◄> , <►> to select the following option: 1 min~59 min, 1 h ~ 24
h.
SW-BA-e-2020
There are 14 adjustable measurement menu
options where you can define the parameters for
1 - 14 adjustable measurements. Use the arrow
keys <▲> , <▼> to select the option and press
<Enter> to move to the next menu level.
Use the arrow keys <▲> , <▼> to set an option for each group of
customizable measurements: Filter, Detector and Mode.
In the Timer menu you can set the options Start Day, Start Time
and Repeat Interval for the timer. Press the arrow keys <▲> , <▼>
to select.
To start measurements with a program, a new function called Timer
was introduced. The user can program the measurement to start at
00:00 the next day, take several minutes of measurements and
27